IPI


===========================
CONFIGURATION FOR ROUTER 1

R0>enable
Password: 
Password: 
R0#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R0(config)#interface GigabitEthernet0/0
R0(config-if)#ip address 
% Incomplete command.
R0(config-if)#ip address 
% Incomplete command.
R0(config-if)#
R0(config-if)#exit
R0(config)#interface GigabitEthernet0/0
R0(config-if)#
R0(config-if)#exit
R0(config)#interface GigabitEthernet0/0
R0(config-if)#ip address 
% Incomplete command.
R0(config-if)#ip address 195.29.1.1 255.255.255.0
R0(config-if)#
R0(config-if)#exit
R0(config)#interface Serial0/0/0
R0(config-if)#ip address 
% Incomplete command.
R0(config-if)#ip address 195.29.12.1 255.255.255.0
R0(config-if)#
R0(config-if)#exit
R0(config)#interface Serial0/0/1
R0(config-if)#ip address 195.29.13.1 255.255.255.0
R0(config-if)#
R0(config-if)#exit
R0(config)#interface Serial0/0/0
R0(config-if)#
R0(config-if)#exit
R0(config)#interface GigabitEthernet0/0
R0(config-if)#
R0(config)#interface GigabitEthernet0/0
R0(config-if)#no shutdown
R0(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up
R0(config-if)#exit
R0(config)#interface Serial0/0/0
R0(config-if)#no shutdown
R0(config-if)#
R0(config-if)#exit
R0(config)#interface Serial0/0/1
R0(config-if)#no shutdown
R0(config-if)#

Press RETURN to get started.













R0>enable
Password: 
R0#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R0(config)#router ospf 10 
R0(config-router)#router-i
R0(config-router)#router-id 1.1.1.1
R0(config-router)#log-adjaca
R0(config-router)#log-adjac
R0(config-router)#log-adjacency-changes 
R0(config-router)#auto-cost reference-bandwidth 1000
% OSPF: Reference bandwidth is changed.
Please ensure reference bandwidth is consistent across all routers.
R0(config-router)#network 195.29.1.0 0.0.0.255 0
^
% Invalid input detected at '^' marker.
R0(config-router)#network 195.29.1.0 0.0.0.255 area 0
R0(config-router)#network 195.29.12.0 0.0.0.3 area 0
R0(config-router)#network 195.29.13.0 0.0.0.3 area 0
R0(config-router)#
R0(config-router)#exit
R0(config)#

================================
CONFIGURATION FOR ROUTER 2

Router>enable
Router#
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface GigabitEthernet0/0
Router(config-if)#ip address 195.29.2.1 255.255.255.0
Router(config-if)#ip address 195.29.2.1 255.255.255.0
Router(config-if)#
Router(config-if)#exit
Router(config)#interface Serial0/0/0
Router(config-if)#ip address 195.29.12.2 255.255.255.0
Router(config-if)#ip address 195.29.12.2 255.255.255.0
Router(config-if)#
Router(config-if)#exit
Router(config)#interface Serial0/0/1
Router(config-if)#ip address 195.29.23.1 255.255.255.0
Router(config-if)#ip address 195.29.23.1 255.255.255.0
Router(config-if)#
Router(config)#interface GigabitEthernet0/0
Router(config-if)#no shutdown
Router(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up
Router(config)#interface Serial0/0/0
Router(config-if)#no shutdown
Router(config-if)#

Router(config-if)#exit
Router(config)#interface Serial0/0/1
Router(config-if)#no shutdown
Router(config-if)#

ress RETURN to get started.













Router>enable
Router#class
Translating "class"...domain server (255.255.255.255)
% Unknown command or computer name, or unable to find computer address

Router#
Router#
Router#
Router#configure terminal 
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)# router ospf 10 
Router(config-router)#router id 2.2.2.2
^
% Invalid input detected at '^' marker.
Router(config-router)#router-id 2.2.2.2
Router(config-router)#
Router(config-router)#log-adj
Router(config-router)#log-adjacency-changes 
Router(config-router)#auto-cost reference
Router(config-router)#auto-cost reference-bandwidth 1000
% OSPF: Reference bandwidth is changed.
Please ensure reference bandwidth is consistent across all routers.
Router(config-router)#network 195.29.2.0 0.0.0.255 area 0
Router(config-router)#netw
Router(config-router)#network 195.29.12.0 0.0.0.3 area 0 
Router(config-router)#195.29.23.0 0.0.0.3 area 0
^
% Invalid input detected at '^' marker.
Router(config-router)#network 195.29.23.0 0.0.0.3 area 0
Router(config-router)#exit
Router(config)#
========================================
CONFIGURATION FOR ROUTER 3
Press RETURN to get started.








R2>enable
Password: 
Password: 
R2#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#interface GigabitEthernet0/0
R2(config-if)#no ip address
R2(config-if)#ip address 
% Incomplete command.
R2(config-if)#ip address 195.29.3.1 255.255.255.0
R2(config-if)#ip address 195.29.3.1 255.255.255.0
R2(config-if)#
R2(config-if)#exit
R2(config)#interface Serial0/0/0
R2(config-if)#ip address 195.29.13.2 255.255.255.0
R2(config-if)#ip address 195.29.13.2 255.255.255.0
R2(config-if)#ip address 195.29.13.2 255.255.255.0
R2(config-if)#
R2(config-if)#exit
R2(config)#interface Serial0/0/1
R2(config-if)#ip address 195.29.23.2 255.255.255.0
R2(config-if)#ip address 195.29.23.2 255.255.255.0
R2(config-if)#ip address 195.29.23.2 255.255.255.0
R2(config-if)#
R2(config-if)#exit
R2(config)#interface GigabitEthernet0/0
R2(config-if)#no shutdown
R2(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up

R2(config-if)#exit
R2(config)#interface Serial0/0/0
R2(config-if)#no shutdown
R2(config-if)#
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up

R2(config-if)#exit
R2(config)#interface Serial0/0/1
R2(config-if)#no shutdown
R2(config-if)#
%LINK-5-CHANGED: Interface Serial0/0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to up



R2>enable
Password: 
R2#router ospf 10
^
% Invalid input detected at '^' marker.
R2#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#router ospf 10
R2(config-router)# router-id 3.3.3.3
R2(config-router)#log-adjacency-changes 
R2(config-router)#auto-cost reference-bandwith 1000
^
% Invalid input detected at '^' marker.
R2(config-router)#auto-cost reference-bandwdith 1000
^
% Invalid input detected at '^' marker.
R2(config-router)#auto-cost reference-bandwidth 1000
% OSPF: Reference bandwidth is changed.
Please ensure reference bandwidth is consistent across all routers.
R2(config-router)#network 195.29.3.0 0.0.0.255 area 0 
R2(config-router)#network 195.29.13.0 0.0.0.3 area 0
R2(config-router)# network 195.29.23.0 0.0.0.3 area 0 
R2(config-router)#exit
R2(config)#


